Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer with Launch X431 IMMO Key Programmer Remote Maker

Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer with Launch X431 IMMO Key Programmer Remote Maker
Launch X431 GIII X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicle. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V+, X-431 Pad V, and more models.

Launch GIII X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

• Read/write for BMW CAS4+ and FEM chips

• Reading and writing car key chip

• Read for BMW engine ISN code

• Read/write EEPROM MCU….

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell

Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys is used to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.

Currently, theLaunch X431 key programmer can be used with the:

• LAUNCH X431 IMMO ELITE key programmer

• LAUNCH X431 IMMO PLUS key programmer

• LAUNCH X431 PAD VII

• LAUNCH X431 PRO3S+ 5.0

• LAUNCH X431 PAD V and more to come.

Function:

• Read Transponder

• Generate Transponder

• Detect Frequency

• Detect Ignition switch coil signal

• Generate Remote (Launch X431 remote)

• Set type of super chip

• Set type of wireless remote

• Unlock Toyota smart key

• Compatible with Launch super chip

• etc…

Functions of super chips:

• Support the conversion of most car model chip types, and support separate matching to achieve vehicle startup.

• Support chips of the 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13 types.

Introduction of 4 smart keys:

Product Name	Picture	Usage Scenario	Function
LS4-NISN-01		LS intelligent key is only compatible with vehicle models equipped with the Kessy system, its functions include keyless starting and door edge sensing.	1.Wireless programming 2. Equipped with anti-theft chip 3. Uses the button cell 2032 4. Circuit board with a 2-year warranty 5. Repeatable writing 6. Batteries need to be installed while generating 7. Supports vehicles with 46, 47, MQB48, MQB49, 4A chips
LN3-PUGOT-01		Certain chips in LN remote can’t generate all vehicle models, it’s needed to check whether the type of chip can support the vehicle model, the chip is integrated into the remote.	1.Wireless programming 2.Equipped with anti-theft chip 3.Uses the button cell 2032 4.Circuit board with a 2-year warranty 5.Repeatable writing 6.Batteries need to be installed while generating 7.Supports vehicles with 11, 12, 13, 7936, 7937, 7947, 7946 chips
LK3-VOLWG-01		LK remote is applied in the situations where the remote needs to be matched but the chip is not needed, or it can also be used with super chip.	1.Wiring programming 2.Not equipped with an anti-theft chip, needs to be used with an anti-theft chip 3.Uses a button cell 2032 4.Circuit board with a 2-year warranty 5.Repeatable writing 6.Batteries cannot be installed while generating
LE4-FRD-01		LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.	1.Wireless programming 2.Equipped with a multimode chip 3.Uses a button cell 2032 4.Circuit board with a 2-year warranty 5.Repeatable writing 6.Batteries need to be installed while generating

Package List:
1pc xLaunch X-PROG 3
1pc xPower adaptor
1pc xMain diagnostic cable
1pc xThe fourth-generation data acquisition cable
1pc xThe fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc xBENCH mode cable
1pc xMCU converter V1
1pc xMCU converter V2
1pc xMCU cable with multiple leads
1pc xEEPROM chip adaptor
1pc xBenz infrared analog acquisition key
1pc xMCU cable with multiple leads
1pc xEEPROM converter
1pc xUser Manual
1pc xLaunch X431 Key Programmer
1pc xSuper Chip
4pcs x Smart Keys
1pc x Type-C to USB A Converter