12V/24V Vdiagtool BT310 Car Battery Tester Cranking & Charging Test Automotive Battery Analyzer 14 Languages Lifetime Free Update

VDIAGTOOL BT310 Car Battery Tester is designed for most 12V 24V 100-2000 CCA batteries. Providing an overall analysis of battery’s health to help you understand its status in advance before it dies. The BT310 battery tester can be used to perform Battery Healey Test, Cranking Test and Charging Test to make you a deeper understanding of your vehicle’s battery system.

Highlight of this Vdiagtool 12V/24V Battery Analyzer VD30:

🚘Support 12V/24V Batteries:VRLA Batteries, AGM flat plate, AGM spiral, SLA batteries, gel batteries, etc. Based on standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.

🚘3 Useful Battery Test Function:Test Battery Capacity, Cranking Test, Charging Test

🚘Short Circuit Protection & Over Current Protection:To ensure safety and convenience during test BT310 car battery tester with the safety design. The circuit could be protected from damage to the instrument or battery while reversing the positive and negative battery connections.

🚘One-Step Operation:Vdiagtool BT310 Battery detector supports testing batteries both in-vehicle and out-of-vehicle. Connect the tester’s clips with battery then it will turn on and ready to test and analyze battery.

🚘3 LED indicators (Good, Normal, Poor)directly tells you what happened to your battery

🚘Lifetime free update and print via PC

🚘14 kinds of languages:English, German, Italian, French, Spanish, Portuguese , Hungarian, Polish, Slovak, Czech, Russian, Dutch, Swedish, Japanese

🚘>99.5% Accuracy, With powerful and smart chip, battery tester BT310 provides more than 99.5% precise testing reports within milliseconds

🚘Wide Range Coverage:Battery Capacity Tester BT310 is available for multi gasoline or diesel types, including car, truck, motorcycle, ATV, SUV, boats, tractors, etc.

Wide Application Car Battery Tester BT310 For Battery Detect in/out of Vehicles

VDIAGTOOL BT310 Battery crancking tester support most 12V/24V 100-2000 CCA batteries including VRLA(Valve Regulated Lead Acid )Battery, AGM flat plate, AGM spiral, SLA battery, or gel battery. The test resault based on standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB. Vdiagtool BT310 could check the battery data such as: Voltage, Internal resistance, Cold Cranking Current and Battery Capacity, Battery Health, and State of Charge.This battery checker not only support car battery test, but also support truck, marine, tractor and more.

🔋Battery Capacity

TestThe BT310 battery tester can determine the condition of battery accorfing to rated value labeled on the battery, display CCA RATED value of battery test. And gives advice on whether to replace the battery by intelligent analysis of battery state of health(SOH).

🔋Cranking Test

BT310 12V&24V car battery tester is able to analyze the starting motor including cranking voltage and the cranking time to check the starting motor works properly or not.

💥Loaded Voltage- The voltage measured when turning on on-board electrical appliances, such as headlights;

💥Unloaded Voltage- The voltage measured when turning off all the on-board electrical appliances.

🔋Charging Test

Test different parts of the charging system, including generator, rectifier, rectifier diode, and so on for a reliable charging volt value. Use this battery load tester to check if the generator provides sufficient power to the vehicle electrical system, and if the battery can hold the charge.

3 Kinds of Indicator Light For Intuitively Understand the Quality of Battery

Good:The battery is in good condition, feel free to use.
Normal:General state of the battery may continue to use.
Poor:The battery is in poor condition, Please replace it in time.

Multi-language Supported

Vdiagtool BT310 battery capacity tester support 14 kinds of languages:English, German, Italian, French, Spanish, Portuguese , Hungarian, Polish, Slovak, Czech, Russian, Dutch, Swedish, Japanese

BT310 Parameter:

Voltage Measuring: 9V ~ 36V

Battery Type: VRLA,GEL,AGM,SLA

Battery Rating: 100CCA ~ 2000CCA

Standards Supported: CCA,JIS,DIN,IEC,EN,GB

Operation Temperature: 0°C~ 60°C(-4°F~ 140°F)

Storage Temperature: 0°C~ 70°C (-4°F~ 158°F)

Packing List:

1pc * VDIAGTOOL BT310 Car Battery Tester

2pcs * Full copper core kelvin clip

1pc * User Manual

Show More Show Less

Weight	0.6 kg
Manufacturer	VDIAGTOOL

We provide a variety of shipping methods, you can choose freely on the checkout page.

Shipping time is only an estimate and may be delayed due to holidays, weather, etc. Orders are typically processed within 2-3 business days, excluding weekends and holidays.

Delivery Service	Time	Description	Price
Freeshipping	10-15 days	Order above $49.99, Shipping with airmail, tracking number available.	$0
Standard	10-15 days	Shipping with airmail, tracking number available.	$6.99
Express Delivery	5-10 days	We usually choose UPS, DHL, FEDEX and other express methods.	$29.99