Autel MaxiBAS BT608 Auto Battery Tester Electrical System Analyzer Scanner Intelligent Battery Health Diagnostic Tool

Description:

Autel MaxiBAS BT608 is a Battery & Electrical System Analyzer that can produces a more accurate examination of the battery’s cold cranking ability, reserve capacity and health.
The BT608 can display a quick health status, register battery and electrical system diagnostics.

About BT608 and BT608(E)

Autel MaxiBAS BT608 exactly the same as BT608(E), Same functions and same price.

BT608: Original version, sell for offline store.

BT608E: E-commerce version, sell for online.

Key Features:

● Support in-vehicle and out-of-vehicle test of all vehicle batteries
● Test 6- and 12-volt batteries: 100 – 3000 CCA, Test 12- and 24-volt cranking/charging systems
● Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
● Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA protocols
● Quick display of battery specifications through battery barcode scan
● The First Car Battery Tester with All Systems Diagnostics
● Illustrate instruction guides for battery positioning and testing & reseting
● Detailed Battery Replacement Instruction, One-Touch Battery Registration for 53 vehicle makes
● Electrical Systems Health Check & Reset
● Lithium Vehicle Battery Test for 13 Makes: check the health of Lithium battery for Temperature, Tolerance etc.
● Battery Usage history (BMW only): display SOC (State of Charge) in the last 5 days, Proportion of SOC duration, Estimated current mileage comparison (battery replacement).
● Multimeter Compatible & 13+ Language Options
● Esay Data Review, Share, Print

Adaptive Conductance

Adaptive Conductance for More Accurate Examinations

The BT608E with an extra screen wiper is a touchscreen Battery & Electrical System analyzer that applies adaptive conductance to produce a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s health. Following is the benefits of adaptive conductance technology:

Reduce Battery Misdiagnosis: INTERSTATE Statistics show that 50% of returned batteries are good and just need charging. With adaptive conductance technology adopted in the battery tester BT608E, the diagnostic accuracy rate reaches 94.11%, which is higher than conductance profiling with an accuracy of 92.06%.

Diagnose Low Capacity Batteries: Some misdiagnoses of battery issues occur when the battery tester cannot quickly identify the battery capacity status. The battery tester BT608E can fix the issues with the adaptive conductance for its bad battery detection rate ups to 63.55%, which is about 15% (56.36%) faster than battery testers using conductance profiling.

Reduce Charge & Reset for Discharged Batteries: Some other battery testers cannot perform SOH tests to identify discharge batteries and might do some reset and recharge in vain. With the adaptive conductance technology, the battery tester BT608E can quickly detect the battery SOH and save the diagnostic waiting time.

Compared to the conductance profiling technology, adaptive conductance can provide users with more accurate and quicker diagnostics for it uses dynamic load instead of fixed load, which allows adjusting the load according to the environment in the car. Besides, adaptive conductance has 30A discharge (10A for conductance profiling) for a faster battery test.

Battery Managerment:

Autel vehicle starter tester BT608 (E) can also run the starter test, follow the on-screen instructions to complete the test. Start the engine and let it idle. The test results will display Starting Voltage, Starting Current, Starting time.

Cranking Tester:
Check for cranking voltage 12 and 24 Voltage
Check for cranking Amps
Check for engine cranking speed before start systems such as the headlights, air conditioning and windshield wipers
Step by step guidance is showed on the display for detailed operation.

Note: All vehicle electrical items that draw power from the charging system must be turned off to establish a baseline output voltage from the alternator.

Generator Tester:
Autel battery replacemment tool MaxiBAS BT608 also supports generator test.

The alternator output test is repeated with the additional electrical load created by turning on several vehicle systems. The value will be measured again both at normal idle speed and between 2,000 to 3,000 rpm engine speed. Alternator is charging correctly. You can get data of Ripple, Off-load Voltage, Load Voltage, Off-load Current, and Load Current.

Battery Managerment:

BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process.

After registration of new battery, it can perform vehicle systems initialization to reset the components.

Support Battery Types and Standard:

● Test 6- and 12-volt batteries: 100 – 3000 CCA

● Test 12- and 24-volt cranking/charging systems

● Test Flooded, AGM, AGM Spiral, EFB, and GEL batteries

● Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS, and MCA

All System Diagnostic:

Autel BT608 diagnostic tool offers technicians the ability to read and clear diagnostic trouble codes in all available systems as well as view code descriptions. Live data and freeze frame data are also available.

Built-In Thermal Printer

Print reports immediately after performing a test or later, all reports are saved in Data Manager.

WIFI printing via the Autel PC MaxiSuite software

Email/ PDF Sharing of Test report

Specifications

Package Content:

1x BT608 Main Unit
1x MaxiCVI MV200 Series
1x Battery Clamp Cable
2x Paper Roll
2x Battery Side Post Terminal TYPE T
2x Battery Side Post Terminal TYPE S
1x Power Adapter
1x USB Cable