Mercedes Benz C6 OEM DoIP Xentry Diagnosis VCI Multiplexer with V2023.12 Software HDD
Mercedes Benz C6 OEM Xentry diagnosis VCI DoIP Pass thur interfacis the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6,For Benz C6 multiplexer to provide complete communication between a vehicle and theXENTRY software loaded on a PC.

Notice:
If you choose hardware and software(500G HDD or SSD)
1. Please install the 500GB HDD(SSD) on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
2. There is keygen in our software HDD(SSD), no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can’t support All Key Lost,needs one key at least.

WIFI PASSWORD : 12345678

Please pay attention :

This device cant work with C4 or C5 software , only can use our C6 software , if you dont have software , please buy our software together when you make the order

MB Star C6 Software Description:

1.DAS / Xentry 2023.12
Xentry:the automatically Diagnosis Assistance System
DAS: New software released by Benz Company after 04/2009 by diagnosis new cars.
2.WIS net 2021.07: Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram, and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration, and the car model -all in detail.
3.EPC net 2018.11: Electronic Parts Catalog
4.ST Finder 2020, StarFinder : 2022,StarFinder : 2008 optional: a Part location finder
5.SDmedia 2015.01
6.This C6 hardwarecan not support Vediamo
7.DTS 9.02 + DTS8.13: Engineering software for offline programming
1) Fix the error that Mercedes-Benz DAS cannot directly call WIS
2) Join the DAS sedan smart offline programming
3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo
4) Join DAS special function password-free access PKW and SMART
5) Repair SMART 450, 451, 452, 454 No longer need TAN Calculator, all offline
6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit
7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function
8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter it directly
9) Add DAS 212,207 prototyp model

10) Add Xentry special features and theVeDoc calculator ($53 for activation)

Software Version: V2023.12 (Xentry and DAS)

What is DOIP?

DOIP is ISO 13400 diagnostic protocol

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:

enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);

WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes Land Rover JLR all use this new Diagnostic Protocol now.

Where do you need DOIP device?

when we test mercedes new car like w222 w205

In AudioComand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz VCI DoIP C6Features:
Support all model series of For Mercedes Benz
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Mercedes Benz VCI DoIP C6 Support Functions List:
Diagnosing
Programming
Smulation studying
Repair information
Automotive maintenance
Technical service bulletin
DPF Regeneration(work same as original)
DPF Regeneration menu lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. Which will avoid the filter being blocked by ash, then the owner has to replace the new diesel particulate filter (worth 1000usd -200usd)

Mercedes Benz VCI DoIP C6 Support Systems:
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6Summary:

Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronicon-boardvehicle systems.
TheMercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
How to Use Mercedes Benz VCI DoIP C6?

1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. There is keygen in our software HDD, no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 can’t support All Key Lost,needs one key at least.
Mercedes Benz VCI DoIP C6 Package List:
1 pc x Mercedes Benz VCI DoIP C6 main Unit
1 pc x OBD cable
1 pc x USB cable
1 pc x Etherent cable
1 pc x Software HDD

Show More Show Less

Weight	0.7 kg

We provide a variety of shipping methods, you can choose freely on the checkout page.

Shipping time is only an estimate and may be delayed due to holidays, weather, etc. Orders are typically processed within 2-3 business days, excluding weekends and holidays.

Delivery Service	Time	Description	Price
Freeshipping	10-15 days	Order above $49.99, Shipping with airmail, tracking number available.	$0
Standard	10-15 days	Shipping with airmail, tracking number available.	$6.99
Express Delivery	5-10 days	We usually choose UPS, DHL, FEDEX and other express methods.	$29.99