Smartsafe Launch GDI Injector Cleaner Machine CNC605A IsmartINC 605 Large Size Fuel Injector Tester 110V/220
The nozzel can be cleaned and tested by simulating the engine condition. It can also be used to clean the fuel injector and fuel supply system on the vehicle without disassembly.
Functions:
1. Suitable for multiple fuel injectors(GDI, EFI, SFI etc)
2. Powerful ultrasonic cleaning
3. Simulation condition test
4. Automatic oil discharge
5.Ultrasonic cleaning
Ultrasonic cleaning to completely remove the carbon deposit on the fuelinjection nozzle.
6.Uniformity and sprayability test
Test the uniformity of injection quantity of each fuel injection nozzle,and observe the injection state of each fuel injection nozzle with the helpof backlight.
7.Sealing test
Test the sealing and leakage of the fuel injection nozzle under a certainpressure.
8.Injection volume test
Make the nozzle continually spray for a certain time, test the injection
volume of the nozzle.
9.No disassembly needed (for EFI&SFI)
Realize EFI & SFI cleaning without disassembling the nozzle.
10.Automatic mode
Automatically test the fuel injection nozzle through the preset program
Launch CNC605A GDI Injector Machine Parameters
Power Supply | AC110V/AC220V 50Hz/60Hz |
Main Engine Power | 350W |
Ultrasonic Power | 60W |
Fuel Pressure | 0.1~10bar |
Air Inlet Pressure | 5~8bar |
RPM | 100~9900rpm Step: 100rpm |
PW | 0.5~25.0ms Step: 0.1ms |
Timer Range | 1~30min |
Tank Capacity | ~3L |
Launch CNC605A Packing List:
There are no reviews yet.