Complete substitution E/F 2013 version SCANNER E F Coding prog V1.5 Diagnosis + Coding + Correction + IMMO

Complete substitution FOR BMW E/F 2013 version SCANNER E F Coding prog V1.5 Diagnosis + Coding + Mileage Correction + IMMO

1. Language: English
2. Operating System: Windows XP WIN7
3. Please do not update online or use original
software, otherwise your BMW E/F SCANNER will be locked! And need send it back
for repair
4. There is dongle in the package. Each dongle
has the serial number, only can be used the same hardware in the package.
5. Instrument Cluster and CAS1-CAS4 Must Be
Adjusted Manually
software system which allows to read,decode and
edit ISN password (It is sync password betweenECU and immobilizer )
Correct checksum also calculated automatically

Model List Of Coding prog :

1-series (E81, E82, E87, E88), 2003+
3-series (E90, E91, E92, E93), 2004+
5-series (E60), 2002-2010
5-series (F10), 2010+
5-series “Gran Turismo” (F07), 2009+
7-series (E65, E66), 2000-2008
7-series (F01, F02), 2007+
X5 (E70), 2006+
X6 (E71), 2007+
Mini Cooper (R56, R57), 2005+
Rolls-Royce, 2003+

List of Supported ECU For Coding prog :

1)Drive –
6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG
2) Chassis – 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR,
EDCSVL, EDCSVR, EHC, EMF, RDC, VDM
3) Body – 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP,
CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM,
KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR,
SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF,SSFA, SSH, STVL, STVR,
SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM

System Capabilities:

E-series CAS1, CAS2, CAS3, CAS3+ mileage Reset by OBD

DTC reading with clear text explanation, car setting adjustment, maintenance
interval adjustment, key programming or blocking, remote control
synchronization and much much more!

1. Diagnosis and interpretation of error codes
2. Reading and adjustment of run hours and maintenance intervals for: Oil,
Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as
CO, CH inspections etc.
3. Adjustment of mileage and maintenance intervals
4. Change/Adjust FA code (currently in test mode)
5. CPU CODING
6. Read/Write RAM/FLASH/EEPROM *
7. Read/Write ISN (marriage CAS and DME/DDE) *
8. ELV Reset (steering wheel lock)
9. Key read/write via OBD2 in CAS2, CAS3, CAS3+
10. Key prog module for E/F-series
11. Learning key or transponder directly in the ignition lock!
12. Lost keys blocking/unblocking
13. Mileage correction module for E/F-series
14. Change AIF (indexes of programming)*
15. Reading the last saved mileage from ECU VIN change *
16. New battery registration