LAUNCH X431 CRB5001 OBD2 12V Car Battery Tester Auto ENG ABS SRS AT Diagnostic Tools OIL BMS TPMS 6 Reset Free Update pk BST360

LAUNCH X431 CRB5001 OBD2 12V Car Battery Tester Auto ENG ABS SRS AT Diagnostic Tools OIL BMS TPMS 6 Reset Free Update pk BST360

New Arrival – LAUNCH CRB5001 Battery Tester

1. Battery Tester :including Battery Health Test, Start System Test ,and Charging Health Test

2. Widely Used Battery Load Tester: Test all car starter lead-acid batteries, including ordinary Lead-acid batteries, AGM batteries,and Gel batteries.

3. Battery Standard : It supports various battery standards and specifications, including CCA(100 1700), BCI, CA, MCA, JIS, DIN ,IEC, EN, SAE and GB etc.

4. Support 4 Major System Diagnosis: Specially designed to diagnose electronic control systems,read/clear codes,data stream,retrieves ECU information for Engine,ABS,SRS,Transmission. turn off warning light

5.Support 6 Common Service Function: Oil Lamp Reset, ABS Bleeding, Brake-pad Reset, BMS Reset,TPMS Reset and Electronic Throttle Position Matching.

6. Support 10 modes of OBD II Test : With full OBD2 functions,including read&clear fault codes,read live data, O2 Sensor & On-Board monitor test, freeze frame data, view readiness status, ect

7. Auto VIN Scan + Diagnostic Report +Diagnostic Feedback + Wifi Free Update Online + DTC Lookup

and More..

Support 11 Languages

English,French,Spanish,German,Italian,Russian,Portuguese,Japanese,Korean,Traditional Chinese, Polish . All languages are free to use.

Supports All 6V – 16V Lead-acid Battery Testing

Battery Health Test

Battery Health Test is mainly to analyze,calculate the health status of the battery and judge the aging degree of the battery

Start System Test

Start System Test is mainly to detect and analyze the starting motor, detect the actual starting current and starting voltage required by the starting motor

Charging Health Test

Charging Health Test is to check and analyze the charging system, including generators, rectifiers, rectifier diodes, etc.

Support common battery types,

Such as ordinary battery (Regular Flooded), AMG start-stop battery (AGM Plate), GEL start-stop battery (GEL), EFP start-stop battery (EFP)Standard — Description — (Testing Range )

CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB

CCA —Cold Cranking Amps, as specified by SAE. The most common rating for cranking batteries at 0°F (-18°C).— (100-2000 )

CA —Cranking Amps standard. The effective starting current value at 0°C (32°F). — ( 100-2000 )

MCA —Marine Cranking Amps standard. The effective starting current value at 0°C (32°F). — (100-2000 )

JIS —Japanese Industry Standard, shown on a battery as a combination of numbers and letters.— ( 26A17–245H52 )

DIN —Deutsche Industrie-Norm. — ( 100-1400 )

IEC —International Electro technical Commission. — ( 100-1400 )

EN —Europa-Norm — ( 100-2000 )

SAE —Society of Automotive Engineers — ( 100-2000 )

BCI—American Battery Council International ( Publishes Automotive Battery Standards)

4 Majors System Diagnosis for Engine ABS SRS Airbag Transmission

1. For Engine:

The car scanner can read & clear DTCs, turn off the check engine light and view live data, allowing you to immediately pull the error log from the engine system.

2. For Anti-lock Braking System(ABS):

It is also designed to work with the anti-lock brake system (ABS) in the same way as basic code readers communicate with the engine.It will pull the diagnostic trouble code of causing the ABS lights to come on. Some of the common problems include blown sensor fuses, low brake fluids, and faulty sensors.Once the problem has been fixed then you can use this ABS diagnostic tool to reset the ABS lights.

3.For Airbag System (SRS)

Reading and clearing any fault code that exists in SRS (Airbag) system, and then turning off the airbag’s warning light.

4. For Transmission

This scan tool views live data, reads and clears codes in transmission systems, and turns off the warning light.

Support 6 Common Reset Function

1. Oil Lamp Reset function

this obd2 scanner allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil, clear the oil light .

2. ABS Bleeding

Help exhaust the air after repair the ABS pump system.

3. Throttle Position Reset

Initialize the throttle actuators to the default state.

4. Brake Reset

It is important in the maintenance of electronic braking system’s safety and efficiency.

5.Battery Reset

Register the battery after replacement.

6.TPMS Reset

Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.

Support Full OBD2 Function:

1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic display.(3 data stream display modes available: figure/value/4 data stream in one graph)

6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Support Brands

For AUDI , For AUSTHOLDEN , For AUTOSEARCH , For BENZ,For BMW , For CHRYSLER , For CITROEN , For DAEWOO , For DEMO , For EOBD2 , For FIAT , For GM , For HONDA , For HYUNDAI,For JPISUZU ,For KIA , For LANDROVER , For MAZDA , For MITSUBISHI , For NISSAN , For OPEL , For PEUGEOT ,For PORSCHE, For RENAULT, For SAAB , For SEAT , For SKODA , For SMART , For SPRINTER , For SUBARU , For SUZUKI , For TOYOTA , For USAFORD , For VOLVO , For VW

More Features

Live Data on Graph

●Auto Vin Reading, Makes Diagnostic More Fast

●Display Real-Time Battery Voltage

●Screenshot & Screen Recorder, Scan the QR to Share & Print Diagnostic Report

●One-click Update Online

●DTC lookup

ect…

Technical Detailed

• Screen Size:4″ Touch Screen
• Resolution:480*800 pixels
• Battery Capacity:3000mAh
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 16GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle’s DLC
• Working Temperature: -10°C to 45°C (14℉ to 113 ℉)
• Storage Temperature: -20°C to 70°C (-4℉ to 158 ℉)

• Measurement Standard/Measurement Range:

CCA: 100-1700
JIS: 26A17-245H52
DIN: 100-1200
IEC: 100-1200
EN: 100-1700
GB: 100-1200
SAE: 100-1700

Packing List

1.LAUNCH Creader Battery 5001 Tool
2.Diagnostic Cable
3.Battery Clamps Cable
4.Data Cable
5.User Manual