Ancel AD610 Plus OBD2 Car Automotive Scanner Engine ABS SRS Airbag SAS Reset Three System Car Diagnostic Tools

Ancel AD610 Plus OBD2 Car Automotive Scanner Engine ABS SRS Airbag SAS Reset Three System Car Diagnostic Tools

NEW Arrivals Ancel AD610 Plus More powerful Function

Ancel AD610 Plus ABS SRS Airbag Crash Data Reset Tool , featuring Engine Check + ABS Air bleeding + SRS Airbag + SAS Steering Angle Reset Function, to find problem, read, clear code in the systems and make car diagnose convenient

Main Reasons for Choosing AD610 Plus

1. Free Update Online

2. Full OBD2 Function, Turn off ‘CHECK ENGINE’ Light, Liva Data.etc

3. Test ABS (Anti-lock Braking System), Reads and clear codes, turns off ABS warning indicator and ABS Service Reset

4. Teset SRS (Supplemental Restraint System), Reads and clear codes, turns off Airbag warning indicator and Airbag Crash Data Service Reset

5. Test SAS (Steering Wheel Angle Sensor) Service Reset.

6.Not just reading the code, clearing the code,but the Reset Function

ANCEL AD610 Plus Basic Diagnostic Functions:

1.Read codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erase Codes
Turns off Check Engine Light (MIL), clears codes and resets monitors

3.Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

4.View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

5.I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

6.O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

7.On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain
components and systems.

8.Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability

9.Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Modules present

11.Access to emissions readiness status

12.on-screen DTC definitions and built-in DTC look up library allow you accurately determine causes of the check engine light and turn off the MIL.

Ancel AD610 Plus Basic Functions Support car list

Compatible with All 12V Standard OBD2 Cars which are Certified by OBDII,usually

1.American (USA) car support from 2001 year to now,

2.European car support 2004 year to now,

3.France car support 2006 year to now,

4.Japanese car support 2005 year to now,

5.Chinese car support 2011 year to now,

Ancel AD610 Plus Special Diagnostic Functions

1.ABS (Anti Lock Brake System ) Service Reset Tool

Reads and clear codes and turns off ABS Bleeding warning indicator. Shows you ABS live data, such as the speed of each wheel, ESP sensors data, Brake assist data and CAN signals data.

—ABS Manual Control Tests – allows to manually control the actuators in order to test ABS motors, solenoids, solenoid enable relays, EMBs, and more

—ABS Motor Test -allows to manually control the ABS pump motor

—ABS Version Test – displays the name of the brake system and the ABS controller version number, software ID, and sequence value

—Actuator Tests -allows to manually control the actuators in order to test AYC valves, inlet valves,outlet valves, pump motors,and TRACS valves

—Autobleed Test, Automated Bleed, or Service Bleed – removes air from the internal brake fluid chambers after servicing the brand

2.SRS (Supplemental Restraint System) Airbag Crash Data Service Reset Tool

Compared to other car airbag diagnostic tool, Ancel AD610 Elite can reset the airbag control module after airbag replacement. This Ancel AD610 Elite scanner is just the perfect airbag reset diagnostic tool for car owners that can’t wait to have.

(only for two times)

Ancel AD610 Elite ‘ ABS & Airbag Function’ Support Car List

Asian Car (2005 to Now)
for AU Ford ( For Australian Market Only ),
for Acura, for Daewoo, for Honda,
for Holden, for Hyundai, for Isuzu,
for Infiniti, for Kia, for Lexus,
for Mazda, for Mitsubishi, for Nissan,
for Perodua, for Proton, for Scion,
for Subaru, for Suzuki, for Toyota.

European Car (2004 to Now)
for Audi, for Abarth, for Alfa-Romeo,
for Aston Martin, for BMW, for Bugatti,
for Bentley, for Citroen, for Dacia,
for EU Ford, for Ferrari, for Fiat,
for Jaguar, for Lamborghini, for Lancia,
for Land Rover, for Maserati, for Mini,
for Maybach, for Mercedes Benz, for Opel,
for Peugeot, for Porsche, for Renault,
for Rolls, for Saab, for Seat,
for Skoda, for Smart, for Sprinter,
for Vauxhall, for Volvo, for VW, for VWCV.
American (USA) Car (2001 to Now) :
for Chrysler, for Ford, for GM

3.SAS (Steering Wheel Angle Sensor) Service Reset Tool

Steering wheel angle sensor reset. Steering wheel angle sensor, a component of vehicle stability control system, is mainly installed in the direction column below the steering wheel. It delivers SAS calibration on more than 35 vehicle makes.

Ancel AD610 ‘ SAS Function ‘ Support Car List :

Asian Car (2005 to Now) ,

European Car (2004 to Now) ,

American (USA) Car (2001 to Now)
for Audi, for Alfa-Romeo, for BMW,
for Chrysler, for Citroen, for Dacia,
for GM ( including brazilian car maker ),
for Fiat, for Honda, for Hyundai,
for Infiniti, for Jaguar, for Kia,
for Lancia, for Land Rover, for Lexus,
for Maserati, for Mini, for Maybach,
for Mercedes Benz, for Mitsubishi, for Nissan,
for Opel, for Peugeot, for Renault,
for Seat, for Skoda, for Subaru,
for Toyota, for Vauxhall, for Volvo, for VW,

Ancel AD610 OBD2 Automotive Scanner Support language:

One device have 2 languages (English + other),

Dutch, Portuguese, Korean, French, German, Spanish, Russian, Japanese, Swedish, Italian, Hungarian, Thai

Please leave us message to choose the language you need, thank you.

Update steps

1, Download AD610 Plus update software on Ancel official website
2, Install the software, register Ancel account in the software
3, Login and input series number and password to register product
4, Click ‘My Updates’ chose the S/N of the product
5, Click ‘update’ and wait patiently for the software to download
6, Check update management, and enjoy new software

Package List

1* Ancel AD610
1* OBDII Diagnostic Cable
1* Usb Cable
1* User Manual