ALL SYSTEM DIAGNOSTIC FOR TOYOTA VEHICLES
Engine System: It supports full modes OBDII functions. Easily identify car problems and turn off engine lights. Help you pass emissions test and keep your car in best condition. Save gas and improve performance.
Transmission System: It can help before transmission problems become a big hassle. That’s because most trouble codes come from your vehicle’s transmission. With a transmission diagnostic tool, you can get a fault code if there is one.
SRS Ai/rbag System:The SRS (Supplemental Restraint System) is a device that deploys the airbag to protect the passenger before the second collision occurs. TheTD700 OBD2 scanner can read/clear the code and turn off the airbag warning light.
ABS System: ABS automatically controls the braking force of the brake when the car brakes, so that the wheels do not lock and enter the state of edge rolling slip (slip rate is about 20%) to ensure the maximum grip between wheels and ground.
Battery System: TheTD700 allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.
TPMS System: Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
Steering Angle Sensor (SAS) System: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
A/C (Air Conditioner) System: this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
ANCEL TD700 Support 11+ Resets function; No Extra Cost
✔️ Oil light service reset: support lamp reset service, reset service distance and service intervals
✔️ EPB RESET: system maintenance, disable and re-enable epb system to change and restart
✔️ TPMS reset: allows you to check the tire check sensor code from the ECU car and perform the TPMS reset after the tire sensor is replaced or rotated.
✔ Battery registration: to make it easy, battery registration is the process of updating your car with information that has brand new batteries have been installed in your car.
✔️ Abs bleeding: release air to restore the sensitivity of ABS brakes or learn new while ABS replacement
✔️ SAS reset: allows you to perform the adjustment of the mobile steering sensor, angled, which permanently store the current steering position as straight forward in the sensor. after calibrating the sensor successfully, the wrong memory will be cleared automatically.
✔️ Throttle release: learn throttle control valves while clearly or replace throttle values.
✔️ Battery voltage test: battery test allows you to get battery voltage with OBD port by scanning tool when engine starts.
✔ BMS reset: when the battery shows age or damage, it is necessary to re-match and register the battery, then clear the wrong code from the dashboard and reset the BMS module.
✔ D-P-F rebuilding: regeneration control system requests D-P-F restoration process while blockage and turn off indicator light.
✔ New nozzle code to replace the previous number when installing a new nozzle or after the replacement is complete.
OBDII Features:
read codes
clear codes
data stream
I/M readiness
Vehicle information
EVAP test result
Support 12 languages:
English,German,French,Spanish,Italian,Russian,Portuguese,Finnish,Polish,Danish,Swedish,Norwegian.
Widely supported vehicles
Professional full function and full system support layout
✔️ 1、for Toyota 1996-2021
✔️ 2、for Lexus 1996-2021
✔️ 3、for Scion 1996-2016
OBD2 support formats
✔️ for GM: works with most for Chevrolet in 2000 and newer, for GMC, for Cadillac, for Buick, for Saturn, for Pontiac etc.
✔️ for Chrysler: works with most 2000 and newer for Chrysler, for Dodge, for Jeep, for RAM, for Plymouth
✔️for Ford: works with 2000 and, for MERCURY, for Lincoln sold in North America
✔️for BMW: works with most for BMW and for MINI in 2000 and newer sold in North America
✔️ for Volkswagen: compatible with most for VW,for Audi, for Bentley in 2006 and newer than sold in North America
✔️for Mercedes: works with for Mercedes and for Smart.Most of the 2000s and newer.
✔️for Nissan: compatible with for Nissan, for Infiniti and for Renault 2005 and newer
✔️for Mazda: compatible with for mazdas. Most of 2005.
✔️for Toyota: works with most for Toyota for Lexus and for Zion in 2005 and newer
Lifetime free updates:
Step 1.Download software update and unzip files
Step 2.Connect the device to the computer TV set cable.
Step 3.Software Update 3.The only supports 7/8/10. in Windows 7, you need to install the drivers in Windows 8/10, you can run the update software directly.
Other Feature:
Auto Vin Scan
Battery test
2 Skin DISPLAY
One click smog check
Beeper/instructions in / measurement units
PRODUCT DESCRIPTION
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
What’s in the box?
1*TD700 OBD2 Scanner
1*Data Line
1*User’s Manual
There are no reviews yet.