Volvo Full System Diagnostic Tool:
1. Engine system: the engine device that provides power to the car and the car heart. It determines the power, economy and stability of the car. The 7110 Scan tool can read and clear your engine error codes, letting you know what’s wrong with your car.
2. Automatic transmission system: AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, for giving full play to the best performance of the engine. The 7110 OBD2 scanner can read/clear code and error messages from AT.
3. Airbag system: SRS is a device that extends the airbag to protect the passenger before the second collision occurs, called Supplementary restraint system (SRS). The 7110 OBD2 scanner can read/clear the code and turn off the airbag’s warning light.
4. ABS system: ABS automatically controls the braking force of the brake when the car braking, so that the wheel is not locked, in the edge rolling slip state (slip rate of about 20%), to ensure the maximum adhesion between the wheel and the ground. 7, 110 OBD2 scanner can turn off the light and position in the wrong part
5. Diesel Particulate Filter (DPF) regeneration: The continuous combustion oxidation mode removes PM (particulate matter) from the DPF filter to stabilize the filter performance.
6. Tire pressure monitoring system reset: it is meaningful to display the sensor ID of the vehicle ECU, enter the TPMS sensor replacement ID and test the sensor.
7. Battery registration and battery maintenance: rematch the control module and motor sensor for battery detection, more accurate battery detection, clear the original low power information, and prevent the relevant control module from detecting false information.
Special features of Volvo vehicles
✔️ The engine oil lamp is reset
The engine oil life system calculates when to change engine oil and filters based on vehicle usage. As soon as the display indicates, the oil needs to be changed according to the recommended maintenance schedule. Whenever the oil is changed, the system is reset so that it can calculate when the next oil change is needed. If the oil is changed before the service light is turned on, the system is also reset.
✔️DPF service
The DPF function allows you to perform a variety of functions on a diesel particulate filter system. The tool will retrieve/erase the DPF-related code, reset the DPF light after changing the filter, micromanage the injection rate, and burn the collected particles when the maximum fill level is reached.
✔️BMS Indicates the BMS service
Allows the scanning tool to assess battery charging status, monitor closed-circuit current, record battery replacement, activate the stationary state of the vehicle, and charge the battery through a diagnostic socket.
✔️SAS (Steering Angle sensor)
SAS Calibrated Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight line position in the steering Angle sensor.
✔️EPB (Electronic Parking Brake)
The EPB function has multiple uses to maintain electronic braking systems safely and efficiently. These applications include deactivating/activating brake control systems, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or brake pad replacement, and reading and clearing EPB/SBC fault codes. It is also able to retrieve fault code information from the ECU.
✔️SRS (Adjusting steering Angle sensor)
SRS collision data diagnosis and reset. Accurately read the SRS (airbag) system error code and erase the error code to turn off the airbag warning light. Prevent the terrible danger of airbags not working properly after a crash.
✔️ABS (automatic brake bleed)
The ABS diagnostic function is used to retrieve and clear error codes, display and save data flow or module information. What’s more, the automatic bleed function will help remove the air captured in the ABS actuator module when the brake line is deflated, ensuring efficient and complete servicing of this important system.
OBD2 Full function detection
AUTOPHIX 7110 is a handheld scanner with 6 OBD2 test modes such as reading/clear code, viewing real-time data/vehicle information, retrieving I/M readiness and EVAP system testing. The affordable OBD2 scanner can retrieve not only generic codes (P0, P2, P3, and U0), but also manufacturer-specific codes (P1, P3, and U1), designed to help technicians quickly identify faulty parts and accurately diagnose emissions-related issues.
The 7110 VOLVO Car Scanner supports the following protocols and vehicles:
Supported protocols: KWP, CAN, UDS. All OBDIIEOBD protocols are supported: VPW, PWM, ISO, KWP 2000 and CAN.
Vehicle:
➤850 (1992-1997), 960 (1991-1997), C30 (2007-2013), C70 Conv (1998-2005), C70 Coupe (1998-2002), C70 (2006-2013).
➤S40 (1996-2012), S60 (2001-2019) S60L (2019-), S70 (1997-200), S80 (1999-2016), S90 (1997-1998), S90 (2017-2019), S90L (2018-2019) ➤V40 (1996-2004), V40 (2013-2018) V50 (2004-2012), V60 (2011-2019), V60 (2019-), V70 XC (1997-2000), V70 XC/XC70 (1997-2007), V70 XC/XC70 (2001-2007) V70 (1997-2016), V90 Off-road (2017-2019), V90 (1997-1998), V90 (2017-2019)
➤XC40 (2018-2019), XC60 (2009-2019), XC70 (2008-2016), XC90 (2003-2019)
Interface: English, French, German, Spanish, Italian, Russian, Portugal, Norway, Denmark, Finland, Sweden
Data flow name and fault database: UK, France, Germany, Italy, Finland, Sweden
Product specification
Display: backlit, color, 320×240 pixels
Operating temperature: 0 to 60°C (32 to 140 F°) Storage temperature: 0 to 80°C (32 to 176 F°)
External power supply: 8.0 to 18.0V via vehicle battery
There are no reviews yet.