AUTOPHIX 7310 OBD2 Scanner All Systems Car Diagnostic Tool for JLR Code Reader DPF ABS TPMS Oil Reset For Land Rover For Jaguar
🚗[FULL SYSTEMS SCAN TOOL]AUTOPHIX 7310 diagnostic scanner is compatible with all Land Rover and Jaguar series vehicles. It can read and erase fault codes in Engine, ABS, Airbag, Transmission, Tire Pressure, Battery, Front Lighting, Parking Brake, Powertrain, Steering Angle, Gear Shift, Cruise Control and so on.
🚗[POWERFUL SPECIAL FEATURES]7310 scanner supports up to 134+ special functions, including TPMS reset, ABS bleeding, oil light reset, DPF regeneration, auto gearbox reset, electronic parking brake reset, throttle/idle speed reset, air suspension reset, body control, battery management and so on.
🚗[FULL OBDII DIAGNOSIS]AUTOPHIX 7310 Enhanced OBDII scan tool can read and erase the trouble codes that can cause emission problems with your vehicle, turn off the MIL (check your car engine) and I/M readiness, read data stream, vehicle identification Info (VIN, CIN, CVN). Built-in a DTC lookup library you can find the related code definitions to help you determine if your car needs repair, and save you time and money.
🚗[EASY TO OPERATE]AUTOPHIX 7310 car diagnostic tool via 2.8″ TFT 262K true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each of menu options, Rugged drop-proof case Prevent falling, the menu layout on the screen is easy to understand and you will no trouble to figuring out how to do what you needed.
🚗[LIFE-TIME FREE UPDATE]With a 7310 automotive scanner, you can enjoy a lifetime Free software upgrade, which let you stay current with the latest technology and add the newest vehicles. Just download the software from the AUTOPHIX website, then follow on-screen instructions to go. This JLR professional scanner is suitable for personal and auto repair shops.
Special function for Land Rover for Jaguar
✔️Oil Light Reset
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display and according to the recommended maintenance schedule. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a service indicator being turned on, also reset the system.
✔️Throttle Position Learning
Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
✔️Battery Registration Reset
The BMS function allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, activate the rest state of the vehicle, and charge the battery via the diagnostic socket.
✔️EPB Replace Brake Pads
The EPB function has a multitude of uses to maintain the electronic braking systems safely and effectively. The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.
✔️SAS (Steering Angle Sensor)
The SAS Calibration Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor.
✔️ABS (Brake Auto Bleed)
The SRS crash data diagnose and reset. Read the SRS(Airbag) system error code accurately and erase the error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.
✔️ SRS (Adjustment steering-angle sensor)
The ABS diagnostic function is used to retrieve and clear error codes, display and save data streams or module information. What is more, the Auto Bleed function will help get air that is trapped in the ABS actuator module out when bleeding your brake lines to ensure that repairs to this vital system are effective and complete.
✔️DPF Service
The DPF function allows you to carry out numerous functions on the Diesel Particulate Filter system. The tool will retrieve/erase DPF-related codes, reset the DPF light after the filter has been replaced, micromanage the injection rate, and burn off collected particles when a maximum fill level is reached.
Airbag reset, Auto Gearbox reset, Air Suspension reset, Transmission System Functions/ESP System Functions /Immobilizer System Functions, etc
Full OBDII functions for all cars
Read Codes, Erase Codes, Live Data, Freeze Frame, Vehicle Info, I/M readiness, O2 Sensor Test, Component Test, On-Board Monitor, EVAP System(Mode 6), Battery Monitor
How to register a battery with this car diagnostic tool for JLR vehicle?
Battery Resgistration
In fact, it’s much easier than imagination. Here is the process step by step: Remove old battery -Install new battery -Enter a new battery digits code(Please correctly enter the digit battery code, Or it will affect the accuracy of the product). If you still have questions about battery replacement or other detail problems, just write to us, we will try our best to help you out.
AUTOPHIX 7310 Supports Multiple Languages
AUTOPHIX 7310 works with English, German, French, Spanish, Finnish, Dutch, Russian, Sverige, Suomi, Norge, Dansk, and Portuguese, you can choose from the settings menu.
The AUTOPHIX 7310 Code Scanner is compatible with All Land Rover and Jaguar from 1996-2022
🚗➤Land Rover Series(1995-2022):
Range Rover / Range Rover Velar / Range Rover Sport
Evoque / Evoque II / Freelander / Discovery / Discovery Sport / Defender
🚗➤Jaguar Series(1995-2022):
XE / XF / XK / XJS / XJ / E-Pace / F-Type / I-Pace / S-Type / X-Type
🚗➤It works on most after1996 OBDII compliant US, European and Asian vehicles
Specifications
● Display:Backlit, Colorful, 320×240 pixel
● Operating Temperature:0 to 60°C (32 to 140 F°)
● Storage Temperature:0 °C to 80°C (32 to 176 F°)
● External Power:8.0 to 18.0 V power provided via vehicle battery
● Size:170mm*96.5 mm*29 mm
● Height: 0.58kg
FQA
1. How to get it to start?
Simply plug into the OBD II port on your car and turn the ignition on. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.
2. Why the vehicle linking error?
I: Confirm that the ignition is ON, check if the scan tool’s connector is securely connected to the vehicle’s DLC;
II: Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing;
III: Verify the control module is not defective.
3. How can I change the brightness of the screen?
AUTOPHIX 7310 has Two skin styles for choosing, you can choose white skin to enhance visibility during the day, and you can choose black skin to protect your eyes during the night. These functions can be implemented on the settings menu.
There are no reviews yet.