Note:
1. AAA battery is not included in the package, because of customs security check!
2. After use, please clean up the residual stains on the probe that might affect the test.
3. If in use for a long time, you’d better remove all batteries and store in a dry place at a normal room temperature.
KINGBOLEN BF100 Sell Point :
√Wide Application: KINGBOLEN BF100 brake fluid tester is a universal fit for most vehicles; Very convenient to use, and broadly applied in individual workshops, repair factories, and dealer workshops. KINGBOLEN BF100 brake fluid tester can be used in all models, whether it is a car, SUV, truck, golf cart, etc…
√High Precision Universal Probe: It is made of special materials that can be resistant to oils and oxidation, and not easily corroded; Very fast and accurate to test DOT-3, DOT-4, and DOT-5.1 brake fluid, only takes seconds to know the results.
√Special Design: Highresolution LCD display with backlit provides an intuitive interface for easy reading data even in the dark; An alarm will be given if the brake fluid contains too much water.
√Energy Saving and Environmental Protection: Our automotive brake fluid tester has an automatic shutdown function(power-saving), it will automatically shut down after 5 minutes of standby.
√Screen Display Results: After the test, the results will be displayed directly on the high-definition screen to determine whether the brake fluid needs to be replaced.
Safety Tips: The brake fluid replacement cycle is generally 2 years. The brake fluid itself has strong water absorption properties, it will absorb moisture in the surrounding air, such as car wash, moisture, etc.
Do you know about Brake Fluid?
Every drivers know how important of the brake fluid when driving, It is directly related to the safety of the vehicle and personal safety, so in the automotive industry. that’s why so many people called the brake fluid as “safety guard”.
The general brake oil replacement cycle is 2 years. Brake oil itself has strong water absorption characteristics, it will absorb the moisture in the surrounding air, for example car wash, humidair, etc., which will directly cause the brake oil quality drop and might cal use accidents:
1. Rear-end Accident
2. Brake Failure
3. Vehicle out of Control
4. Traffic Accident .
BM100 Brake Fluid Tester with High Sensitivity Probe
With advanced high-quality sensors, it is highly sensitive and quick to resond, convenient to use
KINGBOLEN BF100 Relieve Hidden Dangers!
A variety o features in one, to protect your driving safety.
01. Rapid detection with sound alarm prompt.
02. Support DOT 3/4/5.1 Switchable.
03. Universal Probe Twistable durable
04. Accurate testing with Rapid Response
05. Easy to handle by oen hand, fitable in one hand
06. High resolution with Highhly discernible
Water Content Description of brake fluid
LCD display the test result to tell you the quality of brake fluid.
To DOT3: lower than 1% High Purity
To DOT4: lower than 2% Status is acceptable
To DOT5.1: higher than 4% Need to Replace
TIPS:
In order to ensure good braking performance, It Is recommended when measuring the oil index to reach the range of 23, Please change the brake oil in time to protect your driving safety.
Details of KINGBOLEN BF100 Brake Fluid Tester
(1). Non-slip Design
Fit for one hand operate, easy to use.
(2). Removable Battery Cover
Easy to replace the batteries, energy save design.
(3). High Resolution Screen
Clear diplay the test result, no matter in glare environment or dark environment
(4). Universal Probe
Durable and can be twisted, convenient and flexible.
KINGBOLEN BF 100 Brake Fluid Tester Description:
1. 5 Status Explanation:
With multiple LED indicators, the measurement results are more accurate and more convenient to use!
a. Red: Brake oil with at least 4% water content
b. Red: Brake oil with about 3% water content
c. Yellow: Brake oil with about 2% water content
d. Yellow: Brake oil with less than 1% water content
e. Green: Without water good condition
2. LED Display Explanation:
a. Green: The current test brake oil is in good condition.
b. Green/ Yellow: Brake oil with less TEMP than 1% water content, Brake oil performance is good, you can use it with confidence.
c. Green/Yellow/Yellow: Brake oil with about 2% water content, is still able to work.
e. Green/ Yellow/ Yellow/Red: Brake oil with about 3%, it is recommended to replace the brake fluid.
d. Green/ Yellow/ Yellow/Red/Red: Brake oil with at least 4%, replace immediately.
How to operate KINGBOLEN BF100 Brake Fluid Tester ?
Step 1: Put 2pcs AAA batteries into main unit.
Step 2: Deep press the power button for 3 sec to power ON the unit.
Step 3: One press the power button to select the current oil type.
Step 4: Insert the test probe into the brake fluid (wipe the probe clean, otherwise it will affect the results) Detect the result by LED display.
Step 5: Hold pressing power button 2 seconds to turn on / off the LED flashlight.
Step 6: Deep press the power button for 3 seconds to power OFF the unit.
Tip 1: After each test, please wipe the probe clean to avoid the residual stains affecting the next use.
Tip 2: If device not use for a long time, it is recommended to take out the battery and store the product in a dry place.
Parameters of KINGBOLEN BF100 Brake Fluid Tester:
Brand: KINGBOLEN
Product Name: Brake oil detector
Model: BF100
Material: Industrial grade ABS material
Display: Three-color LED light display
Colo: Black
Battery: Battery No.7 (2 sessions)
Test Range: DOT3、DOT4、DOT5、DOT5.1
Temperature: 0-60°C
Product Size: 6.73inch *1.56inch *0.87inch
Weight: 71g
Be Applicable: All vehicles
Packing listing
1pc * KINGBOLEN BF100 Brake Fluid Tester (No battery)
There are no reviews yet.