LAUNCH X431 X-PROG 3 Key Programming Immobilizer Programmer OBD2 Scanner for LAUNCH X431 PRO3S+/X431 V+

Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and CAS4+/FEM chips,
infrared keys, generating special keys, reading BMW engine INS code.
2. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
3. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Advantages:
1. Supports engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of AW/0B5 gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of UDS engine.
5. Supports E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For engine ECU).

Core Functions:
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for non-35XX instrument (it can be read directly through independentharness without removing the IC).
4. Supports ECU replacement for the fourth-generation of engine;
5. Supports ECU replacement for the fifth-generation of engine.
6. Supports the all lost and replacement for the fourth generation of EZS, comfortable ECU, and KESSY IC.
7. Supports the F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for engines.
10. Erase the password for engine and gearbox within 3S.
11. Add the function of calculating the password for the key within 1 minute.

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.

4Wire GI Numonyx SST
Adesto GigaDevice OKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCT Xicor
Atmel I2C Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony

It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates

Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs

X-PROG 3 Dtails&Functions:

1. Car key slot ——— Place the car key to perform the key matching function
2.DB26 ——— Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot ——— Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole ——— Place the key chip to perform key matching
5. Status indicator ——— Power indicator
6.DIY slot ——— Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket ——— Complete EEPROM or MCU data read and write operations
8.DC12V power supply ——— Connect DC12 power supply
9.DB15 ——— Connect the main wiring

Support System

Engine system, automatic transmission, instrument system, CAS, body system, lock system, etc.

Support Car Brands

Volkswagen, Audi, Skoda, Seat, BMW, Mercedes-Benz, Toyota, and more models continue to be updated…

LAUNCH X431 X-PROG3 work with X431 Serial product

support X431 V , X431 V+, X431 PRO3S, X431 PAD V, ect