New 507 MEG17.9.12 ECU 39134-2B511 for Kia Rio 391342B511 Electronic Control Module

New 507 MEG17.9.12 ECU 39134-2B511 for Kia Rio 391342B511 Electronic Control Module
New MEG17.9.12 ECU507
Part Number: 39134-2B511
Fitments: for KIA Rio

Notice: use ktag or other ECU Equipment to clone old ECU data to new ECU .

Programming Tips:
This ecu have two processor inside and you read them separately, ktag read the engine which processor which is SAKTC1762 transmission processor which is ST10F275
China or Original ktag is for the engine processor

Original Pcmflash with Module #76 is for transmission processor
[Kia/ Hyundai: MG7.9.8/ MEG17.9.12 Gearbox (ST10F275/ TCU) RD/WR]

Easy job is for Original pcmflash, vvdi and other chip programmers can read st10f275 in circuit

[Solutions to common fault problems]:

1 The fault light is on, indicating that there is a problem with the sensor.

2 If the computer board “ECU” is repeatedly burned or the fuel cannot be refueled, please check whether the generator voltage is normal.

3 If there is a missing cylinder phenomenon, check whether the spark plug, ignition wire, fuel injector, etc. are normal.

4 If the idle speed is unstable, please check whether the idle motor and throttle valve body are normal and whether there are foreign objects.

5 If it is difficult to start, please check whether the pressure sensor and water temperature sensor are normal.

6 If it cannot start, please check whether the crankshaft position sensor “speed sensor” is normal.