NexLink NL102P OBD2 Auto Scanner Car Diesel Truck DPF Regenerate Oil Reset For Diesel 2 in 1 Heavy Duty Trucks ODB OBD 2 Diagnostic Tool

NexLink NL102P OBD2 Auto Scanner Car Diesel Truck DPF Regenerate Oil Reset For Diesel 2 in 1 Heavy Duty Trucks ODB OBD 2 Diagnostic Tool

Nexas NL102P is a professional Diagnostic Scanner for both cars and trucks.

1. For cars, it can do the function read/ Erase Fault codes, Graph live data display, retrieve vehicle information, EVAP Test, O2 Sensor Test..etc.

2. For Trucks, it support new trucks (which have standard Truck protocols J1587, J1939 and J1708 and should have release year requirement) to read multi-systems.

Also works great on special functions oil light service reset, and DPF regeneration on some trucks.

NL102P Features & Functions

1. Troubleshooting tips guide technicians to the root of problems faster, saving diagnosis and repair time
2. Easily determine the cause of the Check Engine Light (MIL), and turn off Check Engine Light (MIL) by erasing the trouble codes and Monitors reset
3. Read and erase generic codes (P0, P1,P2,P3 and U0), manufacturer specific codes (P1,P3 and U1) and pending codes.
4. Display DTC definition, freeze frame data, monitor and I/M readiness status (emissions), and vehicle information (VIN, CIN and CVN)
5. Read, store and playback live O2 sensor test data
6. Read PCM live data stream, with graphic data display
7. Add oil light sevice reset for Maxxforce, Detroit, Cummins.
8. Add DPF reset or regeneration for Maxxforce, Detroit, Cummins, ISUZU, HINO HD Truck.
9. Uniquely featured with battery power monitor function.

The NL102P give 6 levels warning tips:

A. <10.8V (before starting): Too Low; Charge your battery, otherwise might not be able to start.
B.10.8V-11.8V (before starting): Slightly Low; Difficult to start, please turn off other electronics and start vehicle to charge.
C. 11.8V-12.8V (before starting): Normal.
D. 12.8V-13.2V (after starting): Too Low; Might not be able to charge the battery, please check other electrical load.
E. 13.2V-14.8V (after starting): Normal.
F. >14.8V: Too High; Might damage the battery, please check the engine stabilizer.

Languages:

English, French, Spanish

Vehicle Coverages:
For Heavy Truck:
Heavy duty trucks in compliance with standard protocols ( J1587, J1939 and J1708), and should have year requirement.(View the below picture)

Support Truck Systems:

Engine, Transmission, Brake, Instrument Panel, Vehicle Management, Fuel System, Cab Climate,Particulate.

Support functions:

1. Read DTC, Clear DTC, Live data, unique battery power monitor for all compatble trucks.
2. Perform the DPF reset or regeneration for Maxxforce Engine, Detroit engine, Cummins Engine, ISUZU Engine, HINO Engine.
3.Perform the oil light sevice reset for Maxxforce Engine, Detroit engine, Cummins Engine.
For Cars:
Support Cars Vehicles:
American Car from 1996 up to now
European Car from 2001 up to now
Asian Car from 2008 up to now

Support Truck Systems:

Engine
System Functions:
Read Codes, Erase Codes, I/M Readiness, Live data, Freese Frame, O2 Sensor Test, On-Board Monitoring,EVAP System, Vehicle Information(VIN, CID, CVN),

NEXLINK NL102P Demonstration

1. Car Scan Module

2. Truck Scan Module

3. Troubleshooting tips guide

Package List:
1pc x Main unit

1pc x OBDII Cable

1pc x 6pin & 9pin Connector

1pc x USB Cable

1pc x User Manual

1pc x Nylon Carry Bag