Professional multibrand auto scanner designed to diagnose electronic control systems of modern cars. Works with a personal computer, tablet or smartphone, programs for Windows and Android are included.
With the installed driver (included in the kit), it works with third-party diagnostic software made for SAE J2534 and RP1210 standards, as well as with loaders, applying programming resolution voltages to various pins of the diagnostic connector.
Works with12Vand24Vvehicles.
AUX programming permission voltage output is available for purchase OBD2 + Aux cable, or you can immediately order the Basic + Aux kit, in which this cable is already present instead of the standard one.
To connect to the adapter can be used as USB or Bluetooth interfaces (built into the adapter SM2-PRO)
All kits include the full current version of the program (all currently available program modules):
VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2.
Works with a large number of diagnostic programs and loaders, made under the standard interfaces SAE J2534 and RP1210. Adapter works better than DPA5 / Nexiq / Inline-6/ Openport 2.0. I tested adapter Scanmatik 2 PRO like J2534 on Allison DOC, GM GDS-2/SPS, Nissan Consult 3+ (have ignition emulator), VAG ODIS Service, Toyota Techstream, Mercedes Xentry/DAS PassThru (have ignition emulator), HONDA HDS, Cummins INSITE, Cummins Calterm III, Noregon JPRO, Volvo Premium Tech Tool, Wabco Toolbox and a lot of flashers ( Combiloader, Chiploader, Ford Module Programming Tool, MDFLASHER, MMC Flasher, OpenBox, PCMFlash)
Specifications adapter SM2-PRO:
Interfaces for communication with a PC (Tablet, Smartphone) – USB or Bluetooth
Power supply: 5 … 36V from the vehicle electrical system or USB (galvanic isolation with power)
Current consumption, not more than 350mA
Internal switching power supplies of own design (no heating + wide input voltage range from 5 to 55V)
Protection for power supply surges “Load-Dump” (when disconnecting the generator while the engine is running)
Supported data buses:
13 x ISO-9141 / ISO-14230 (K-LINE)
1 x J1850VPW
1 x J1850PWM
4 x CAN
1 x Single Wire CAN
Built-in multiplexer for switching diagnostic lines
Widest support for J2534-1 / 2 standards
Programming voltage supply (5-24V) – on the OBD2 connector legs: 6, 8, 11, 12, 13, 14
AUX programming voltage output (need optional OBD2 + Aux cable)
Bluetooth range, not less: 10m (Class 2)
All manuals are in Russian.
Package Includes:
Scanmatik SM2-PRO adapter
Power supply cable from the cigarette lighter
OBD II cable + Aux
USB cable (1.8 m)
Case
There are no reviews yet.