Original Xhorse VVDI2 VAG Version with Basic + VW 4th & 5th IMMO + OBD48 + 96bit 48-Clone + MQB + Porshe+ Peugeot

100% Original Xhorse VVDI2 VAG Version with Basic + VW 4th & 5th IMMO + OBD48 + 96bit 48-Clone + MQB + Porshe+ Peugeot
VVDI2 for VAG language:English, Polish, Spanish, Chinese
This VVDI2 withActivatedSoftwareList:
1) VV-01 VAG 4th immobilizer
2) VV-02 VAG 5th immobilizer
3) VV-03VAG Copy 48 transponder by OBDII
4) VV-04 ID48 96Bit Copy
5) VV-05 VAG MQB Immobilizer
6) VP-01 Porsche Immo Data Tool
7)VPSA-01 PSA
8) VK-01 Transponder Programmer
9) VJ-01 Passthru J2534
Notice:
VAG EDC17 PIN, MAC, CS calculation via eeprom and flash dump (the function can be activated even without having condor key cutter), please provide VVDI2 serial number to activate for free.
VVDI2 VAG Version Functions:
Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Special Function: Change KM,EEPROM Dump Tool,Engine control Unit,K-Line Instrument/Immobox,adapt Unit,Component Protection.
VVDI2 Special Function:
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
Add more vehicle models:
VVDI supports diagnostic function only for VAG groups, but VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can connect BMW plug to realize OBD function, and meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency
Automatically identify chip type
Support multi-function on VW vehicles
Key programmer
Remote control programmer
J2534 compatible adapter
1. Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Key programmer
Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
4. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI2 VAG Reviews:
I successfully added a key bcm2 on a 2013 audi a5.
2007 Audi A4 B7 RB8 crypto – mileage correction ok
Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.
Audi A6: Testet with A6 read kessy working, learned new key
Skoda Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
VW passat. B5: Pulled PIN, programmed key, corrected miles.
VW Passat B6 2009: Pulled PIN but couldn’t get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
Audi A4 2006 : mileage correction success .
Audi A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.
Had no problem with precoding and programmin 2 keys for 2014 Jetta today. Worked well.
Audi A6 C6 2007 add valet key via OBD without problem.