ThinkDiag Safe supports more than 95% of the car models on the market, and when using the diagnostic function, you can purchase the required vehicle software to start the diagnosis. After the new user activates the device, it will have the basic functions of the whole system of the car + maintenance functions (5 fixed Oil, SAS, EPB, TPMS, ABS) for 1 year.
Thinkcar Thinksafe OBD2 Diagnostic Tool Car Scanner Professional Full System 5 Reset OBD2 scanner compatible with Bluetooth
Thinksafe, new to Thinkcar in 2021, is a powerful OBD2 scanner
● All system diagnostics
● Full OBD2 functionality
●5 common reset functions
● Available for iOS and Android
● The most cost-effective OBD2 scanner
Supports the 5 Resetting service function
● BRACK reset: When you replace the new brake pads, you can use this function to reset the electronic brake system to ensure your driving safety
● Oil reset: This feature recalculates the engine oil life system after you change the oil
● SAS reset: This function helps clear faulty steering Angle sensor memory and plays an important role in steering Angle sensor calibration.
● TPMS reset: This feature makes sense when displaying the sensor ID from the vehicle ECU, entering the TPMS sensor replacement ID, and testing the sensor
●BLEED reset: Automatic bleed procedures are used for vehicles equipped with brake pumps
5 reset functions are free for one year, other reset functions cannot be purchased, the second year needs to be purchased, buy 5 packages, $29.95/ year
The connector device is composed of a diagnostic connector and an APP. Through the connector, the device is connected to the vehicle diagnostic seat, and the blue tooth communicates wirelessly with a smart phone or tablet, thus realizing the installation of client software and diagnostic software in the intelligent terminal for vehicle fault diagnosis.
Supported models: Compatible with all OBD II compliant models since 1996 Support agreements: ISO 14230-4(KWP2000) IOS 15765-4(CAN) ISO 9141-2(IOS) ISO14229(UDS) SAEJ 1850(VPW&PWM)
All Car Full OBD2 Functions Mode
Turn Off Engine Light Check Vehicle Status
1. Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
6. O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.
8. Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
9. EVAP Monitor Test
Worldwide Vehicle Coverage(Support 120+ Brand)—NO Car number limit,all free
For Amercian
for Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGM
For European
for Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZ
For Asian
Acura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United Pakistan
Auto VIN Scan,Bluetooth Connection Diagnose and Online Diagnostic Report
●Auto VIN Scan
When you click “Auto VIN Scan”,the scanner will automatically recognize your car information and scan it
●Bluetooth Connection
You only need to turn on the Bluetooth switch on your phone, and the scanner will automatically connect to your phone’s Bluetooth
●Online Diagnostic Report
You can send the diagnostic report produced by the software via Bluetooth or email and then print it out
●Data Stream
View 4 kinds of real-time data at the same time
Support Mobile Phone&Tablet Computer
Android:5.0
IOS:9.0
THINKSAFE OBD2 Diagnostic Tool is suitable for Mobile phones, tablet computer that meet the above version information. When the adapter is connected to the car, you only need to detect and diagnose your vehicle through the mobile phone’s Bluetooth 4.2 and APP. It is suitable for most DIY car owners and maintenance and repair car stores on the market.
Download”THINKDIAG”On The APP Store For IOS or Download”THINKDIAG+”On The Google play For Android
3 Simple Steps To Activate
1.Download the “thinkdiag” application in the mobile software store
2.Open the “thinkdiag” application and click the “Activate” button in the lower left corner
3.Enter the SN number and activation code to complete the activation
Note:The activation code is on a small note in the box
THINKSAFE Display Screenshot
There are no reviews yet.