XTOOL IK618 X100 Key Programmer With KC501 & KS01 Car OBD2 Diagnostic Tools X100 PAD3 Key Programmer

XTOOL IK618 X100 Key Programmer With KC501 & KS01 Car OBD2 Diagnostic Tools X100 PAD3 Key Programmer

XTOOL IK618 Best Auto Key Programmer Like X100 Elite

1. IMMO & Key Programming

2. Bi-Directional Control

3. 31+ Special Function

4. OE Level All Systems Diagnostics

5. Ultra Compatibility to Extend Capabilities

6. Wider Vehicle Coverage

7. Robust Hardware

8. Online Support & Life Time Warranty

Professional IMMO & Key Programming

XTOOL IK618 is a professional car key programming tool that can perform pro-level key programming andIMMO functions as below:

1. Read PIN.

2. Add Transponder/Smart Key/Remote Learning, Disable Lo_st~Keys, Make Dealer Key.

3. Key Learning for BMW CAS4/3/2/1.

4. Key Programming for VW, for Audi, for Skoda, for Seat, for Bentley, for 4th,5th, MQB IMMO.

5. Make Dealer~Key for Toyota & for Lexus (with KS-1 key programmer).

6. Make Dealer~Key for Mitsubishi(with KS-2 key programmer).

7. IMMO ECU Reset/Coding.

8. IMMO Data Backup/Restore.

9. Read & Write Key Chips.

10. Read & Write Mercedes Infrared Keys.

11. Read & Write EEPROM.

12. Detect Remote Frequency.

OE Level All Systems Diagnostics + Bi-Directional Control

IK618 bi-directional scan tool comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

1.Pull Codes: Including manufacturer-specific codes, pending codes, permanent codes.

2. Clear Codes: Clear codes, reset monitors and turn off warning lights.

3.Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid

temperature and etc.

4. Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.

5.ECU Information: Check ECU version and etc.

6. Active Tests: EVAP Tests, Test injectors, cooling fan, A/C Clutch, Windows, Doors, Sunroof, ABS MotorPump, solenoids, relays and etc.

30+ Reset Services

XTOOL X100 IK618 auto scan tool comes with comprehensive service options including Oil Reset, EPB, SAS, DPF, BMS, Injector Coding, IMMO Keys, ABS Bleed, Throttle Relearn, Gearbox Match, Suspension Calibration, Headlight, Window Reset, Seat Match/Configurations, Tire Refit, Crankshaft Position Variation Learn, Airbag Reset, Disable Transport Mode, Electronic Pump Activation, EEPROM Adapter and etc.

14 Kinds of Language

XTOOL IK618 supports 14 languages: English, Spanish, German, French, Portuguese, Italian, Finnish, Arabic, Japanese, Thai, Korean, Polish, Russian, Chinese

Note:If you need to modify the language, please provide the SN number to XTOOL

Live Data Stream

XTOOL IK618 display live data stream in text or graph like misfire data, engine rpm, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, actual fuel temperature vs desired fuel temperature and etc

> Compatible with KC-501, KS-1, Can Fd Key Programmers

> XTOOL IK618 comes standard with KC-100 key programmer. However, you may choose to get KC-501, KS-1, KS-2 key programmers to extent its capabilities to the next level.

> It’s also can works with the CAN FD adapter and M281

KC501 Key & Chip PROGRAMMER

·PC Supported

·MCU / EEPROM Chip Read / Write

·ECU Read / Write

·MC9S12 Encrypted Chip Read / Write

·Key Reading / Writing

·Mercedes Infrared Key Reading / Writing

·Finding the Control Frequency

·IC Card Reading / Writing

KS01 Functions

For Toyota / For Lexus All lost Nodisassembly

Support For Toyota / For Lexus all lost and dismantled, read the original car data from OBD to generate emergency simulation key, directly drive the car without disassembly, intelligent and efficient

Intelligently generate new keys

Through the reading of the original car data, a smart key is generated, which can then be operated according to the process of adding a key, supporting the generation, copying, and simulation functions of the key chip.

XTOOL IK618 Includes: