XTOOL X100 PAD3 Plus KC501 With M821 Adapter Support Mercedes-Benz All Key Lost

XTOOL X100 PAD3 Plus KC501 With M821 Adapter Support Mercedes-Benz All Key Lost
Xtool X100 PAD3 Features
1.New keys programming
2. PIN Code reading with EEPROM
3.Hexadcimal editor(Win Hex)
4.Reads keys from immobilizer’s memory
5.New immobilizer programming
6.Vehicle Identification Number programming
7.Reset ECM & reset immobilizer
8.New remote controller programming
9.With full and strong database for the most important vehicle makes

X100 PAD3 Functions
* Key programming
* Oil Reset/Engine oil light reset
* Odometer Adjustment
* Tire Pressure Warning Light Reset (Manual Operation)
* Timing belt light reset (Manual Operation)
* EPB Electrical Parking Brake Adaptation
* TPS Throttle Body Adaptation
* Steering Angle Calibration
* Battery Reset
* PIN Code Reading
* Hexadcimal editor(Win Hex)
* OBDII Diagnosis
* INJ Code
* Support the latest vehicles with CAN BUS and UDS protocol

Key Programming Vehicle Coverage:
Asia: for Toyota,for Lexus, for Honda, forAcura,for Mazda,forNissan, for Infiniti, for Mitsubishi, for Subaru, for Suzuki, for Kia, for Hyundai, for Daewoo, for SSANGYONG, for Proton, etc
Europe: for Audi, for VW, for Skoda, for Seat, for Porsche, for Opel, for Citroen, for Peugeot, for Jaguar, for Land Rover, for Lincoln, for Renault, etc

With KC100
Support for Volkswagen for Audi for Skoda 4th&5th generation all key lost, MQB key matching
Support for Volkswagen for Audi for Skoda 4th generation 96-bit online, 5th generation online, MQB online key matching
Support for BMW CAS1-CAS3++ CAS4/CAS4+ key matching
Support for Land Rover’s smart key write start function after 2015
Support for Fiat, for Fischer, 500, for Palio and other models
Support for Toyota for Lexus all lost and disassembly-free, can realize 94, 98, 88, A8, A9, 39 simulation key generation(Need to buy Xtool KS-1)
Some car models require that you have pin code before key programming

KC501 Key & Chip PROGRAMMER
KC501 is a professional Key & chip programmer which can not only read,write keys and read key remote frequency, but also generate dealer keys. It support read and write MCU/EEPROM chips, reach and write Mercedes Infrared keys. Moreover, it support PC connection which brings you better user experience.
1. Support registers, microcontrollers, key programming and other types of chips read/write, anticipate and other functions;
2. Support key automatic identification, partial key reading, key generation, key reading information, key check, key unlock and other functions;
3. Can be put in use with tablets for immobilization.
4. EZS for Mercedes Key Programming
5. Car Key Remote Control Frequency Test
6. EEPROM Read&Write Chip
7. MCU Read&Write
8. ECU Programming Clone

XTOOL M821 Adapter
XTOOL M821 Mercedes-Benz All Keys Lost Communication Adapter is used for finishing and optimizing all key lost programming for multiple Mercedes-Benz modules.With M821 Adapter, you can save as much as 65% of the calculation time on the process, or save you from plugging the key emulator in and out for hundreds of times.
1. Support EIS Modules
W164(OLD) W166 W204 W212(NEW)
W164(NEW) W216 W221 W211
2. Support Mercedes-Benz all keys lost

Package List:
1 set xX100 PAD3
1 set xKC501
1 set xM821 Adapter